Compatible filter set
G4/F7 filter set for Aldes DFE+ 450
2 filters · 200 × 415 × 48 mm · galvanised steel frame · replaces ref. 11058100
The G4/F7 set puts a fine ISO ePM1 65% filter (formerly F7) on the supply side of the Aldes DFE+ 450, to stop pollen and fine particles, and keeps an ISO Coarse 75% (G4) on the extract side. The recommended set in town, near a busy road or for allergy sufferers.
€49.00incl. 21% VAT
Out of stock, restocking in progress
Notify me when available
- Compatible with Aldes DFE+ 450, matching dimensions and filter class
- Delivery in Belgium, free from €75.00
- Secure payment, Bancontact, cards
- Made in the European Union
Compatible filters, not original parts. Brand and model names are used solely to identify the units concerned.
What the set contains
Each set delivers every filter of the unit, ready to fit.
| Class | Position | Dimensions | Frame |
|---|---|---|---|
| 1 × ISO Coarse 75 % · G4 | Extract air | 200 × 415 × 48 mm | galvanised steel |
| 1 × ISO ePM1 65 % · F7 | Supply air (fresh) | 200 × 415 × 48 mm | galvanised steel |
Why this set
- Fine filter on the supply side against pollen
- Extract side in G4, as original
- The recommended choice in town
G4 or F7?
| ISO Coarse 75% (G4) | ISO ePM1 65% (F7) | |
|---|---|---|
| Stops | Dust, insects, lint | Pollen, fine particles, soot |
| Position | Extract and supply air | Supply air, intake side |
| For whom | The unit's standard configuration | Allergies, city, busy road |
| Lifetime | 6 months | 6 months, watch it more closely |
Specifications
- Set
- G4/F7 · G4/F7 filter set (ISO Coarse + ePM1)
- Unit
- Aldes DFE+ 450
- Number of filters
- 2
- Filter dimensions
- 200 × 415 × 48 mm
- Thickness
- 48 mm
- Frame
- galvanised steel
- Available classes
- 1 × ISO ePM1 65% (F7) and 1 × ISO Coarse 75% (G4)
- Matching manufacturer references
- 11058100
- VMCD reference
- KIT-200x415x48-GALVA-G4F7
- Type
- Compatible filter, not an original part
- Made in
- European Union
- Recommended replacement
- Every 6 months, check every 3 months
When and how to replace
Every six months in most homes, more often near a road, during building work or with pets. A grey, bulging or smelly filter needs replacing without waiting for the date.
- 01
Switch off the power
Turn the unit off or cut the breaker before opening the hatch.
- 02
Open the filter hatch
Remove the old filters and note their direction: an arrow or label shows the air inlet side.
- 03
Slide in the new filters
The F7 goes on the supply side, the G4 on the extract side. The frame must sit flat, without play.
- 04
Reset the indicator
Close up, switch back on and reset the filter reminder on the controller, if there is one.
The other sets for this unit
Same dimensions, different filter class.
This set also fits
These units use the same filter shape.
Frequently asked questions
Is this G4/F7 set an original Aldes part?
No. It is a compatible set, made to the dimensions of the DFE+ 450 filter (200 × 415 × 48 mm) and to the stated filter class, by a European manufacturer of ventilation filters.
When will this set be dispatched?
Within two working days of payment, by parcel, anywhere in Belgium. If the set is out of stock, leave your email: we will let you know as soon as it is back.
How do I fit the filters in the DFE+ 450?
The fine filter (F7) goes on the supply side, the coarse filter (G4) on the extract side. An arrow or label on the frame shows the air direction. Reset the filter indicator after fitting.
Would you rather we did it?
In Brussels, Brabant and Hainaut we replace the filters during the unit's service visit and hand you a written report.