Compatible filter set
F7/F7 filter set for Aldes DFE TOP 450
2 filters · 200 × 415 × 48 mm · galvanised steel frame · replaces ref. 11058100
The F7/F7 set fits both sides of the Aldes DFE TOP 450 with a fine ISO ePM1 65% filter (formerly F7). Maximum filtration, higher pressure drop: only for units that accept it, keeping an eye on the filter indicator.
€58.00incl. 21% VAT
Out of stock, restocking in progress
Notify me when available
- Compatible with Aldes DFE TOP 450, matching dimensions and filter class
- Delivery in Belgium, free from €75.00
- Secure payment, Bancontact, cards
- Made in the European Union
Compatible filters, not original parts. Brand and model names are used solely to identify the units concerned.
What the set contains
Each set delivers every filter of the unit, ready to fit.
| Class | Position | Dimensions | Frame |
|---|---|---|---|
| 2 × ISO ePM1 65 % · F7 | Extract air, Supply air (fresh) | 200 × 415 × 48 mm | galvanised steel |
Why this set
- Fine filtration on both sides
- For units that accept F7 on the extract side
- Watch it more closely
G4 or F7?
| ISO Coarse 75% (G4) | ISO ePM1 65% (F7) | |
|---|---|---|
| Stops | Dust, insects, lint | Pollen, fine particles, soot |
| Position | Extract and supply air | Supply air, intake side |
| For whom | The unit's standard configuration | Allergies, city, busy road |
| Lifetime | 6 months | 6 months, watch it more closely |
Specifications
- Set
- F7/F7 · F7/F7 filter set (ePM1)
- Unit
- Aldes DFE TOP 450
- Number of filters
- 2
- Filter dimensions
- 200 × 415 × 48 mm
- Thickness
- 48 mm
- Frame
- galvanised steel
- Available classes
- 2 × ISO ePM1 65% (F7)
- Matching manufacturer references
- 11058100
- VMCD reference
- KIT-200x415x48-GALVA-F7F7
- Type
- Compatible filter, not an original part
- Made in
- European Union
- Recommended replacement
- Every 6 months, check every 3 months
When and how to replace
Every six months in most homes, more often near a road, during building work or with pets. A grey, bulging or smelly filter needs replacing without waiting for the date.
- 01
Switch off the power
Turn the unit off or cut the breaker before opening the hatch.
- 02
Open the filter hatch
Remove the old filters and note their direction: an arrow or label shows the air inlet side.
- 03
Slide in the new filters
The F7 goes on the supply side, the G4 on the extract side. The frame must sit flat, without play.
- 04
Reset the indicator
Close up, switch back on and reset the filter reminder on the controller, if there is one.
The other sets for this unit
Same dimensions, different filter class.
This set also fits
These units use the same filter shape.
Frequently asked questions
Is this F7/F7 set an original Aldes part?
No. It is a compatible set, made to the dimensions of the DFE TOP 450 filter (200 × 415 × 48 mm) and to the stated filter class, by a European manufacturer of ventilation filters.
When will this set be dispatched?
Within two working days of payment, by parcel, anywhere in Belgium. If the set is out of stock, leave your email: we will let you know as soon as it is back.
How do I fit the filters in the DFE TOP 450?
The fine filter (F7) goes on the supply side, the coarse filter (G4) on the extract side. An arrow or label on the frame shows the air direction. Reset the filter indicator after fitting.
Would you rather we did it?
In Brussels, Brabant and Hainaut we replace the filters during the unit's service visit and hand you a written report.